Description
Extra shipping charges may apply.
PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.
Chisel Carving Kit K.2252 has a Total Retail Value of $482.
Motor and Speed Control carry a 2-Year Limited Warranty.
Components:
1. Series LX Motor:
These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredoms drill presses. They also are well matched with the H.18, H.15 and H.15D Quick Change and Hammer Handpieces for stone setting. It comes equipped with a motor bale for hanging,
and our standard 39″ long key-tip shafting for
connecting to any of Foredoms interchangeable, quick disconnect
handpieces.M.LX motors are available in 115 Volt and 230 Volt.Foredoms permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control. Damage will result if the motor is connected to any other speed control.
and our standard 39″ long key-tip shafting for
connecting to any of Foredoms interchangeable, quick disconnect
handpieces.M.LX motors are available in 115 Volt and 230 Volt.Foredoms permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control. Damage will result if the motor is connected to any other speed control.
2. C.EMX Speed Control:
This
table top speed control is constructed of heavy duty plastic with
durable solid state electronics. It has a dial control for precise speed
settings, as well as good repeatability of previous settings. The
C.EMX-1 has special electronics that converts AC current from an
electrical outlet to DC current- the type required by the motor. It
also has a special plug that fits the motor’s shielded plug.For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 5″ long, 5-7/8″ wide, 2-3/4″ high, 2 lb /1 kg packaged wt. It is interchangeable with Foredom’s C.TXR-1 and C.SXR-1 controls.3. H.50 Chisel Handpiece:
table top speed control is constructed of heavy duty plastic with
durable solid state electronics. It has a dial control for precise speed
settings, as well as good repeatability of previous settings. The
C.EMX-1 has special electronics that converts AC current from an
electrical outlet to DC current- the type required by the motor. It
also has a special plug that fits the motor’s shielded plug.For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 5″ long, 5-7/8″ wide, 2-3/4″ high, 2 lb /1 kg packaged wt. It is interchangeable with Foredom’s C.TXR-1 and C.SXR-1 controls.3. H.50 Chisel Handpiece:
Foredom’s chisel
handpiece gives a power assist to carving projects in all types of wood,
plastic, and plaster. This handpiece has a contoured body design that
features a rugged plastic barrel and tapered aluminum ends. The easy to
maintain chisel handpiece is recommended for use at low speed with
Series TX and LX motors and in forward rotation only with Series SR
motors. Handpiece attaches to any flex shaft machine with a standard key
tip shaft. The Chisel Handpiece must be used only in the forward motor direction. Recommended Speed:Optimum Speed Range- 3,000-10,000 rpm.Max. Operating Speed- 18,000 rpm.Handpiece specifications: 6″ long, 1″ in diameter, 4.6 oz, 6.65 oz packaged wt.
handpiece gives a power assist to carving projects in all types of wood,
plastic, and plaster. This handpiece has a contoured body design that
features a rugged plastic barrel and tapered aluminum ends. The easy to
maintain chisel handpiece is recommended for use at low speed with
Series TX and LX motors and in forward rotation only with Series SR
motors. Handpiece attaches to any flex shaft machine with a standard key
tip shaft. The Chisel Handpiece must be used only in the forward motor direction. Recommended Speed:Optimum Speed Range- 3,000-10,000 rpm.Max. Operating Speed- 18,000 rpm.Handpiece specifications: 6″ long, 1″ in diameter, 4.6 oz, 6.65 oz packaged wt.
Maintenance: After every 200
hours of use you should clean and lubricate this handpiece. The old
grease must be cleaned off of the interior cam chamber and replaced with
new lubricant. If you do not have Foredom Grease (Part No. MS10008), it
is available in our web store under Supplies and Parts – Lubrication-
All Lubricants. Follow the instructions that came with your handpiece or
click on the link for step by step maintenance instructions.Operating Tip: Using
the chisel handpiece with a dial speed control is easier than with a
foot operated control. Table top dial controls are available separately
and named below. Consider ordering a kit containing the chisel handpiece
and dial speed control (kit depends on motor -M.TX & M.LX or M.SR-
that you have). Certain Foredom bench mounted flex shafts also come with
dial controls built into their bases (models M.LXM, M.TXM and M.SRM).
hours of use you should clean and lubricate this handpiece. The old
grease must be cleaned off of the interior cam chamber and replaced with
new lubricant. If you do not have Foredom Grease (Part No. MS10008), it
is available in our web store under Supplies and Parts – Lubrication-
All Lubricants. Follow the instructions that came with your handpiece or
click on the link for step by step maintenance instructions.Operating Tip: Using
the chisel handpiece with a dial speed control is easier than with a
foot operated control. Table top dial controls are available separately
and named below. Consider ordering a kit containing the chisel handpiece
and dial speed control (kit depends on motor -M.TX & M.LX or M.SR-
that you have). Certain Foredom bench mounted flex shafts also come with
dial controls built into their bases (models M.LXM, M.TXM and M.SRM).
4. 6pc Chisel SetAKHK550 with A-KC503, A-KC504, A-KC505, A-KC506, A-KC509, and A-KC510 chisels, 5pc Chisel Set AKHK560 with A-KC501, A-KC502, A-KC507, A-KC508, and A-KC511 chisels and 6pc Chisel Set AKHK570 with A-KC512, A-KC513, A-KC514, A-KC515, A-KC516, and A-KC517 chisels.
6. Flexible shaft grease
Reviews
There are no reviews yet.