Extra shipping charges may apply.
K.5240-2 Woodcarving Kit, 230 Volt
PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.
Woodcarving Kit K.5240-2 (230 Volt Model) has a Total Retail Value of $457.
Motor and Speed Control carry a 2 Year Limited Warranty.
1. Series SR Motor: Foredom’s most popular and best motor for general use. The 1/6 hp, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It offers substantially more power than any of our older universal motors – 66% more than Series CC and 33% more than Series S and old SR motors. It comes equipped with a motor bale for hanging, and our standard 39″ long key-tip inner shaft and outer sheath for connecting to any of Foredomâ€™s 19 interchangeable handpieces.
2. C.FCH-2 Speed Control: Foredom’s popular foot operated speed control. It has solid state electronics and comes in a heavy duty plastic housing with an extra wide design.
3. H.44T Handpiece: This collet style handpiece is popular among woodcarvers as it accomodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. The H.44T is a member of the Foredom system of interchangeable handpieces.
4. AKWK53 Accessory Kit (see complete product listing below):
27 pc. assortment with 3/32″, 1/8″ and 1/4″ shank accessories. It includes many unique items from Foredom- ScotchBrite Radial Bristle Discs, Purple Ceramic Sanding Bands and Discs, Typhoon Burs, V Stones, CeramCut Blue Stones, and more.
5. Fur, Feathers, and Fins:
3 disc DVD set with in-depth instruction for beginning woodcarvers as well as detailed tips for more advanced power woodcarvers who want to enhance their technique. Filmed at the Vermont studio of renowned carver, Frank Russell, Fur, Feathers, & Fins shows the many steps involved in bringing simple blocks of tupelo wood to life. In over 3 hours of video material, Frank walks you through the set up of his work space, the tools he uses, safety concerns and lots more. He covers in great detail the carving of 3 different animal projects: A Cotton Tail Rabbit, Mallard Drake Duck, and Small Mouth Bass. Frank’s congenial manner and accomplished teaching style lend to the enjoyment of learning to carve.
6. Flexible shaft grease
Accessory Kit AKWK53 consists of the following (we reserve the right to substitute comparable accessories when needed):
A-10082 1 Rotating Bur Holder, 1/4″, 1/8″ holes & cup
A-4511-6 1 3M Radial Bristle Disc, 3/4″, 80 grit
A-4922 3 Purple Ceramic Sanding Bands, 1/2″ x 1/2″, 60 grit
A-4923 3 Purple Ceramic Sanding Bands, 1/2″ x 1/2″, 80 grit
A-4924 3 Purple Ceramic Sanding Bands, 1/2″ x 1/2″, 120 grit
A-4926 3 Purple Ceramic Sanding Bands, 1/2″ x 1/2″, 220 grit
1 Vanadium Steel Cutter, Knife Edge, 3/8″ dia. x 9/16″, 1/8″ Shank
A-CK396 1 CeramCut Blue Stone Point, Round Top Taper, 1/8″ dia. x 1/2″ long, 3/32″ Shank, 120 Grit
A-CK897 1 CeramCut Blue Stone Point, Flat Top Taper, 3/32″ dia. x 3/8″ long, 1/8″ Shank, 120 Grit
A-CK8302 1 CeramCut Blue Stone Point, Ball Nose, 1/8″ dia. x 1/2″ long, 1/8″ Shank, 120 Grit
A-KB14522 1 Typhoon Carbide Bur, Cylinder, Coarse, Plain End, 9/16″ x 3/4″, 1/4″ Shank
A-KB32519 1 Typhoon Carbide Bur, Cylinder, Fine, 5/16″ x 1/2″, 3/32″ Shank
A-KB32718 1 Typhoon Carbide Bur, Ball Nose, Coarse, 5/16″ dia. x 1/2″ long, 3/32″ Shank
1 Mandrel, 3/32″ Shank x 1/16″ Arbor Hole Capacity
A-M26 1 Mandrel, Sandpaper, 1/8″ Shank
A-PD26 1 Plated Diamond Point, Ball, 4.3mm dia. x 3.8mm long, 2.35mm (3/32″) Shank, 125-180 Micron (120-200 Grit)
A-PD10 1 Plated Diamond Point, Cylinder, 4.0mm dia. x 8.0mm long, 2.35mm (3/32″) Shank, 125-180 Micron (120-200 Grit)
A-SD188 1 Rubber Sanding Drum Mandrel, 1/2″ x 1/2″, 1/8″ Shank
A-V356 1 V Series Point, 1/8″ shank, Cylinder, 3/8 dia. X 3/8 h, 46/60 grit
Digital Version (810KB .pdf) of Woodcaving Manual:
Prior to the release of Fur, Feathers, and Fins, we packed a Carving Manual in all of our woodcarving power tool kits. Hard copies of the manual are no longer available, however, a digital version is available by clicking on link below. The Manual offers Step-by-Step Instruction for 3 Carving Projects: 1.Spoon, 2. Canvasback Duck, 3. Hummingbird Pin.
The Foredom 5240 kit contains these main components:
All new Frank Russell 3 hour DVD
All new Foredom SR Motor – Foredom’s new 1/6 hp, ball bearing, hang-up style motor with speed up to 18,000 rpm.
This Foredom motor offers substantially more power than any of Foredom’s other universal motors – 66% more than Series CC and 33% more than Series S and old SR motors.
The All new Foredom SR operates in forward and reverse rotation for added versatility.
Foredom FCT Control – this foot operated speed control has solid state electronics and comes in a heavy duty plastic housing with an extra wide design.
Foredom No. 44T Handpiece. This collet style handpiece is popular among woodcarvers since it accomodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. The No. 44T is a member of the Foredom system of interchangeable handpieces.
Kit also includes:
Foredom New No. 53 Accessory Kit (47 pc. assortment with 3/32″, 1/8″ and 1/4″ shank accessories). It includes many of the latest and most unique items from Foredom- ScotchBrite Radial Bristle Discs, Purple Ceramic Sanding Bands and Discs, Typhoon Burs, V Stones, CeramCut Blue Stones, and lots more.
Foredom Rotating Bur and Tool Holder for all size shank accessories plus bonus small round bur holder with lid.
Foredom Flexible shaft grease.
Pin and wrench for changing collets. Carving manual – an excellent resource from Woodcarving Illustrated Magazine with photos and lots of valuable information.